BLGSG - TOPCOATS BRUSH GOODS, 7722
- MSDS: BLGSG
- Manufacturer: RUST OLEUM CORP
- Product Name: TOPCOATS BRUSH GOODS, 7722
- National Stock Number: 8010-00N019499
Product Identification
Product ID:TOPCOATS BRUSH GOODS, 7722
MSDS Date:07/16/1991
FSC:8010
NIIN:00N019499
MSDS Number: BLGSG
Responsible Party
VERNON HILLS, IL 60061
Emergency Phone: 708-367-7700
Info Phone: 708-367-7700
Cage: 08882
Contractor
Telephone: 847-367-7700
Cage: 08882
Ingredients
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 40-55%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: HARMFUL IF INHALED. MAY
AFFECT BRAIN/NERVOUS SYS CAUSING DIZZ, HDCH/NAUS. RPTD OVEREXP MAY
PROGRESSIVELY LEAD TO STAGGERING GAIT, CONFUSION, UNCON/COMA.
CAUSES NOSE & THROAT IRRIT. SKIN/ EYE: CAUSES SKIN & EYE IRRIT
WHICH CAN LEAD TO DERM W/RPTD OVEREXP. INGEST: MAY CAUSE GI IRRIT,
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: NAUS, VOMIT & DIARRHEA. CHRONIC:
REPORTS HAVE SHOWN RPTD & PRLNGD OCCUPATIONAL OVEREXP TO SOLV
W/PERM BRAIN & NERVOUS SYS DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE FROM EXPOSURE, RESTORE BRTHG & NOTIFY PHYS.
EYE: FLUSH IMMED WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. NOTIFY PHYS. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER,
REMOVE CONTAM CLOTHING AND WASH BEFORE REUSE. INGEST: DO NOT
INDUCE VOMIT. KEEP PERSON WARM, QUIET AND GET MEDICAL ATTN. ASPIR
OF MATL INTO LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE
FATAL.
Fire Fighting
Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:1.0%
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
CHEMICAL OR FOAM)
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL PROT
EQUIP . H2O SPRAY MAY BE INEFFECTIVE. H2O MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILDUP & (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAME. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT SURFS.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATE AREA
AND REMOVE WITH INERT ABSORBENT AND NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120 F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. DO NOT
TAKE INTERNALLY. EMPTY CONTAINERS MAY BE HAZARDOUS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD CHEM CARTRIDGE RESP
(TC23C) TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY AND ORGANIC
VAPORS DURING SPRAY APPLIC. IN CONFINED AREAS: USE NIOSH/MSHA
APPROVED SUPP-AIR RESPIRATOR OR HOODS (TC19C).
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHST VENT IN VOLUME AND
PATTERN TO KEEP TLV OF HAZ INGREDS BELOW ACCEPTABLE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS CLOTHING TO PREVENT CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: POSSIBLE AUTOIGNITION OR EXPLOSION. IF WATER IS USED,
FOG NOZZLES ARE PREFERRED.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>307F,153C
Vapor Pres:2.0 @ 20 C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER.
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:59-68
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BY OPEN FLAME-CARBON MONOXIDE AND
CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.